We are the official distributor of the German company E. Epple & Co. GmbH, a first-class manufacturer of sealants, adhesives and other chemie for industry.
Epple Chemie has been on the market since 1938 and provides a wide range of high-performance industrial sealants, adhesives and casting resins.
In addition to the standard product range, Epple Chemie also offers more than 100 specially developed tailor-made solutions.
E. Epple & Co. GmbH products meet the highest quality and safety standards and are used in a wide range of applications from mechanical engineering, the automotive industry, construction to the aerospace industry.
Thanks to our long-standing cooperation, we can offer the most suitable solution for your specific application.
Standard portfolio of products:
| Type | Description and application field | Viscosity (Pas) | Density (g/cm) 20°C | Temperature range | Flashpoint | Thinning and cleaning |
|---|---|---|---|---|---|---|
| EPPLE 22, Viscose-elastic | Red/transparent filler; good adhesive power on surfaces and threads. Due to its low viscosity difficult filling is possible. High resistance against ageing. | 8-10, low-vicous | 0,93 | up to + 250 °C | <21 °C | EPPLE 11 |
| EPPLE 28, Removable | Blue filler for demountable surfaces and threads. Fills various joints, both rubber and steel. On thicker layers it acts as removable foil. Filled surfaces may be simply dismantled. | 10-13, dense | 1.07 | up to +150 °C | <21 °C | EPPLE 13 |
| EPPLE 30, elastic | Dark grey filler for welds, grooves, metal sheet seams, bushings. Resistance against ageing, with high bond strength; also suitable for permanent vibrations or moves of filled surfaces; also for vertical surfaces. | pasty | 0.89 | -20 °C up to +200 °C | <21 °C | EPPLE 12 |
| EPPLE 32, acid-resistant | Black, constantly elastic filler, with extreme chemical resistance, for reliable filling and insulation. | pasty | 1.06 | from -50 °C | <21 °C | EPPLE 12 |
| EPPLE 33, tough-elastic | Grey filler with good adhesive power on rough surfaces and threads; also for absorbent materials. | 8-9, low-viscous | 1.10 | up to +320 °C | <21 °C | EPPLE 11 |
| EPPLE 35, fire-resistant | Grey filler for filling within high temperature areas. After drying (ca 20 hrs) extremely hard and resistant against abrasion. | 10-13 | 2.00 | up to +800 °C | – | water |
| EPPLE 37, resistant against high temperatures | Grey filler with high resistance against fire and chemicals. It is recommended, for example, for high power engines. It remains elastic up to ca +120 °C; then it gradually stiffens. | pasty | 1.38 | up to +400 °C | <21 °C | EPPLE 13 |
| EPPLE 40 plastic | Grey filler based on poly-methacrylate, with good adhesive power on metal and with good elasticity. | 6-8 | 1.25 | -20 °C up to +180 °C | <21 °C | EPPLE 11 |
More products:
| Type | Description and application field | Viscosity (Pas) | Density (g/cm) 20°C | Temperature range | Flashpoint | Thinning and cleaning |
|---|---|---|---|---|---|---|
| EPPLE 41 | Grey filler based on aqueous dispersion, soft and elastic, with slight surface glutinosity. The filler may be over-coated and is free of silicon. | 450-550 | 1.25 | -20 °C F53 up to +180 °C | <21 °C | EPPLE 11 |
| EPPLE 45, permanently elastic | Filler based on aqueous dispersion. Soft, elastic. It may be over-coated and is free of silicon. | 90-110 | 1.36 | -10 °C up to +180 °C | – | water, EPPLE 11 |
| EPPLE 46, permanently elastic | Filler based on aqueous dispersion is resistant against saponification, water, and weather conditions, and shows very good adhesive power on various surfaces; it may be over-coated and is free of silicon. | 350-450 | 1.32 | -10 °C up to +180 °C | – | water, EPPLE 11 |
| EPPLE 11,12,13,14 thinners | For cleaning of instruments and thinning of EPPLE fillers. They are unsuitable for products free of solvents. | <21 °C |
We offer other products from Epple Chemie – adhesives, liquid resins and sealants according to your requirements.
For more information, please do not hesitate to contact us.