Epple fillers
Type | Description and application field | Viscosity (Pas) | Density (g/cm) 20°C |
Temperature range | Flashpoint | Thinning and cleaning |
---|---|---|---|---|---|---|
EPPLE 22, Viscose-elastic |
Red/transparent filler; good adhesive power on surfaces and threads. Due to its low viscosity difficult filling is possible. High resistance against ageing. |
8-10, low-vicous |
0,93 |
up to + 250 °C |
<21 °C |
EPPLE 11 |
EPPLE28, Removable |
Blue filler for demountable surfaces and threads. Fills various joints, both rubber and steel. On thicker layers it acts as removable foil. Filled surfaces may be simply dismantled. |
10-13, dense |
1.07 |
up to +150 °C |
<21 °C |
EPPLE13 |
EPPLE30, elastic |
Dark grey filler for welds, grooves, metal sheet seams, bushings. Resistance against ageing, with high bond strength; also suitable for permanent vibrations or moves of filled surfaces; also for vertical surfaces. |
pasty |
0.89 |
-20 °C up to +200 °C |
<21 °C |
EPPLE12 |
EPPLE 32, acid-resistant |
Black, constantly elastic filler, with extreme chemical resistance, for reliable filling and insulation. |
pasty |
1.06 |
from -50 °C |
<21 °C |
EPPLE12 |
EPPLE33, tough-elastic |
Grey filler with good adhesive power on rough surfaces and threads; also for absorbent materials. |
8-9, low-viscous |
1.10 |
up to +320 °C |
<21 °C |
EPPLE11 |
EPPLE35, fire-resistant |
Grey filler for filling within high temperature areas. After drying (ca 20 hrs) extremely hard and resistant against abrasion. |
10-13 |
2.00 |
up to +800 °C |
- |
water |
EPPLE 37, resistant against high temperatures |
Grey filler with high resistance against fire and chemicals. It is recommended, for example, for high power engines. It remains elastic up to ca +120 °C; then it gradually stiffens. |
pasty |
1.38 |
up to +400 °C |
<21 °C |
EPPLE13 |
EPPLE40 plastic |
Grey filler based on poly-methacrylate, with good adhesive power on metal and with good elasticity. |
6-8 |
1.25 |
-20 °C up to +180 °C |
<21 °C |
EPPLE11 |
Type | Description and application field | Viscosity (Pas) | Density (g/cm) 20°C |
Temperature range | Flashpoint | Thinning and cleaning |
---|---|---|---|---|---|---|
EPPLE41 |
Grey filler based on aqueous dispersion, soft and elastic, with slight surface glutinosity. The filler may be over-coated and is free of silicon. |
450-550 |
1.25 |
-20 °C F53 up to +180 °C |
<21 °C |
EPPLE11 |
EPPLE45, permanently elastic |
Filler based on aqueous dispersion. Soft, elastic. It may be over-coated and is free of silicon. |
90-110 |
1.36 |
-10 °C up to +180 °C |
- |
water, EPPLE11 |
EPPLE46, permanently elastic |
Filler based on aqueous dispersion is resistant against saponification, water, and weather conditions, and shows very good adhesive power on various surfaces; it may be over-coated and is free of silicon. |
350-450 |
1.32 |
-10 °C up to +180 °C |
- |
water, EPPLE11 |
EPPLE11,12,13,14 thinners |
For cleaning of instruments and thinning of EPPLE fillers. They are unsuitable for products free of solvents. |
|
|
|
<21 °C |
|
Other products of the EPPLE company (adhesives, fluid resins, fillers) are available on demand.